The short answer

A sandwich loaf is a pan bread with a softer crust and a closer crumb than a country boule. The calculator can plan a lean dough at 65% hydration. The sandwich bread recipe is the enriched loaf, with milk, butter, and sugar. King Arthur’s sourdough sandwich bread is the published comparison, and it also uses commercial yeast.

  • Choose the slice first: a lean pan loaf and an enriched soft loaf are different formulas.
  • The dough calculator covers flour, water, salt and starter, not milk or butter.
  • Match dough weight to the pan you own, then proof in that pan.
Explore dough & technique

Start from the slice you want

People search for a sourdough sandwich loaf when they want slices that hold peanut butter, cheese or a fried egg without a hole the size of a thumb. That goal is different from an open-crumb country loaf. Chasing big holes, then squashing them into a sandwich, fights the bread. Decide that you are baking pan bread, then pick a formula written for a pan.

There are two honest versions. A lean sandwich loaf is still flour, water, salt and starter, baked in a tin so the sides stay square. An enriched sandwich loaf adds milk, butter, oil, sugar or egg so the crumb stays soft. The sourdough sandwich bread recipe is that enriched pan on this site: milk, butter, and sugar, starter only, one loaf from 400 g of flour. King Arthur’s sourdough sandwich bread is the published comparison. It uses commercial yeast alongside starter, dry milk, and a two-loaf batch. Do not delete the fat and expect the same softness from the lean ledger below, and do not copy their grams onto this site’s recipe.

A lean pan-loaf ledger the calculator can check

Total flour 500 g = 100% Total water 325 g = 65% Salt 10 g = 2% Prefermented flour 50 g = 10% Starter at 100% hydration = 100 g Flour to weigh = 450 g Water to weigh = 275 g Dough weight = 835 g

This illustrative lean formula uses 500 g total flour, 65% hydration, 2% salt and 10% prefermented flour. Total water is 325 g. Salt is 10 g. Prefermented flour is 50 g. At 100% starter hydration that is 100 g of starter, which already contains 50 g of the water. You weigh 450 g flour, 275 g water, 100 g starter and 10 g salt. Dough weight is 835 g before baking.

Type those targets into the dough calculator if you would rather have it split the starter for you. The loaf will taste like lean sourdough and slice more evenly than a 75% boule because the pan supports it and the hydration is lower. It will not taste like a buttery pullman. If softness is the point, use the sandwich bread recipe. Do not add this page’s water to that milk, and do not type that recipe’s milk into this 65% ledger.

ChoiceWhat changesWhere to plan it
Lean pan loafFlour, water, salt, starter at about 65% hydrationDough calculator and this ledger
Enriched soft loafMilk, butter, sugar or egg, sometimes added yeastThe sandwich bread recipe, or another complete formula
Country boule reshaped into a tinHigh hydration and open crumb forced into a panUsually the wrong tool for sandwich slices

Enrichments are real ingredients, not a drizzle

Milk and butter add fat and sugars the four-ingredient calculator does not know about. They change how the dough feels, how fast the crust browns and how the loaf keeps. If a recipe lists 60 g of butter, that 60 g is part of the batch weight and part of the method. Leaving it out is a different bread. Adding it to the lean 835 g dough without rewriting the liquids can make a greasy, slack dough.

Sugar and milk also brown faster than a lean crust. An enriched loaf often bakes covered or tented for part of the time so the top does not burn before the center sets. Follow the recipe’s temperature and tin. Our steam guide is written mainly for lean hearth loaves; a sandwich tin has its own covered or uncovered stages. Record which one you used.

Match the dough to the pan you own

A sandwich loaf’s height comes from dough weight, pan volume and proof, not from a score that opens like a country ear. A common home tin is about 8½ by 4½ inches or 9 by 5 inches, but pans vary. The published recipe’s stated pan is the one its dough weight was written for. If your tin is much longer, the same 835 g will bake flatter. Scale the whole formula, including starter and salt, rather than pouring the dough into a random tin and hoping.

Lightly grease or line the tin if the recipe says so. A lean dough can stick at the corners. Fill the pan with the shaped loaf seam-down so the top skin is smooth. If you are baking two smaller loaves, divide by weight, do not tear the dough by eye. Note the piece weight in the bake log. That number is what you will repeat.

Strength and proof look different in a tin

Bulk fermentation still happens before shaping. A sandwich dough that never expanded in the bowl will not fill the tin just because the walls are there. Use the same bulk signs as other wheat doughs: volume, bubbles and a dough that holds a fold. Then shape a tight log or a simple pan shape. You want enough surface tension to keep the top even, not so much degassing that you erase every bubble.

Final proof is in the pan. The dough is ready to bake when it has risen into the tin and the top is aerated but not collapsing over the rim. A large overhang that wrinkles and falls is often overproofed. A loaf that goes into the oven well below the rim and then bursts out a tight shoulder can be underproofed. Heat the oven fully. An underheated oven sets the crust late and can leave a dense line at the bottom of the slice.

Bake, cool and slice for sandwiches

Bake until the top is evenly browned and the sides of the loaf, if you tip it out briefly with protection, are set rather than doughy. Internal appearance after cooling matters more than a single temperature you copied from a different size of loaf. If you use a thermometer, compare it with the recipe’s cue and with the cooled crumb, and write the number down. Do not slice the loaf hot. The center of a sandwich loaf is exactly where a too-early cut looks gummy.

Cool on a rack so the bottom does not steam itself soggy. For square pullman-style slices, wait until the loaf is cool, then use a long knife. Store the loaf as the cooling guide describes. Soft crusts stale differently from a thick country crust; a bag or a tin box keeps sandwich slices usable. Toast is a fine second life, and the recipe library is written for bread you have already baked.

If the slices are full of holes or tight as a brick

A few medium holes in a lean pan loaf can be normal. A tunnel under the top crust usually means the dough was underproofed, shaped with a large air pocket, or both. Read the large-holes guide before you add more water. A uniformly tight, damp crumb can be under-fermented, cut while hot, or baked in too cool an oven. Those are different next steps.

If the loaf never cleared the pan and the crumb is dull, check the starter and the prefermented-flour math before you enrich the formula. Adding butter to a dough that did not ferment will not create the missing gas. Pick one change: a warmer bulk, a slightly longer pan proof, or a move from this lean ledger to a complete enriched recipe. Log pan size, dough weight and the time the loaf went into the oven.

Put the sandwich loaf on a schedule

Pan proofing can be a same-day bake if the starter is ripe and the kitchen is warm, or an overnight plan if you retard the shaped loaf in the tin. A tin in the refrigerator needs space and a cover that will not stick to the dough as it rises. Do not leave an enriched dough with milk or egg for an unplanned day on the counter. Perishable enrichments follow the recipe’s timing and refrigeration, not a generic overnight you invented for a lean boule.

Work backwards in the bake planner from the time you want to slice, and leave cooling outside the bake time. A sandwich loaf that is still hot at lunch is not ready to judge or to pack. The planner organizes your day. It does not decide that the dough has filled the pan.

FAQ

What hydration is a sourdough sandwich loaf?

A lean pan loaf can start around 65% total hydration so the crumb is closer and the dough fits a tin. Enriched sandwich recipes often use milk and fat instead of simply adding water, so compare the full formula rather than one percentage.

Can I turn my country boule dough into sandwich bread?

You can bake a lean dough in a pan, but a wet country formula is built for an open crumb. For regular sandwich slices, use a pan formula and a lower hydration, or follow an enriched sandwich recipe.

Does the dough calculator include butter and milk?

No. It handles flour, water, salt and a flour-and-water starter. Add enrichments only from a recipe that accounts for them, and record those weights separately.

Why does my sandwich loaf have one big hole under the crust?

That tunnel is often an air pocket from shaping or a loaf that went into the oven before the pan proof finished. Check both before you change hydration.

Is the 835 g ledger a tested recipe?

No. It is an illustrative lean formula so you can see the gram weights. For a soft enriched loaf, use the sandwich bread recipe. This page still explains the pan, the hydration, and the slice.

Sources & further reading

This guide combines published references with our own explanations and decision aids. Numerical examples are illustrative; they are not records of Sourdough Bench test bakes.

Put it into practice.

Keep the recipe, observations and next change together in your downloadable bake log. For a symptom-led starting point, use the loaf troubleshooting guide.

Keep reading