Fuzzy mold, or pink, orange or other unexpected colors, means the starter should be thrown away. Do not scrape the surface and keep feeding, and do not cook with that jar. Gray hooch and a tangy smell are a different, hungry-starter problem.
- Fuzzy growth and pink or orange color are discard-the-jar signals.
- Scraping mold off the top does not make the rest of the starter safe.
- Restart in a clean jar from a healthy portion you trust, or from flour and water.
What mold looks like on a starter
Mold on a sourdough starter is surface growth: fuzzy or hairy patches, often white, green, gray, black or blue, sitting on the flour paste or on the dry rim where starter has splashed. It can start as a small spot and spread. USDA guidance on molds in food is blunt about soft, wet foods: what you see on the surface is not the whole story, because growth can extend underneath. A starter is a wet paste. It is not a hard cheese you can trim.
Look at the jar from the side and under the lid. Splashes on the wall are a common place for mold to begin, especially if the lid traps condensation and the jar sits for days. A single fuzzy spot is enough. You do not need the whole surface to look like a science project before you stop using it.
Pink, orange and other colors are not a style of hooch
King Arthur’s sourdough FAQ tells bakers to discard a starter with pink or orange streaks or other unusual color, along with mold. Those colors are not the gray-brown liquid of a hungry culture. They are a reason to throw the jar out. Do not wait to see if a pink streak “ferments away” after a feed.
Ordinary starter colors still vary. Whole-wheat and rye starters look tanner than white ones. A dried film at the edge can look dull. Compare with mold’s texture: fuzz and unexpected bright color are the warnings. If you are unsure, the safe baking choice is to discard the culture. A new starter costs flour and time. Using a contaminated one is not a shortcut.
Kahm and strange skins need caution, not a recipe
Some jars grow a wrinkled, matte white film that bakers call kahm yeast. It is not the same texture as fuzzy mold, and bakers argue about whether a mild film can be scraped away. This site will not give you a rule for saving a doubtful film. If the surface is fuzzy, colored, or smells rotten, throw it out. If you cannot tell kahm from mold, throw it out. Keeping a questionable culture to avoid wasting 40 g of flour is a bad trade.
Colorado State University Extension’s starter guidance stresses clean equipment and routine feeding. A film you do not recognize is a reason to wash the jar, not to stir the film into the next loaf “for flavor.” Flavor experiments belong to healthy starters and finished, baked bread.
Do not bake, cook or scoop around the mold
Throw the starter away. Do not feed the same jar and hope the next rise crowds the mold out. Do not bake the moldy portion into crackers or pancakes. Heat is not a reliable plan for a culture you already know is moldy, and the discard recipes on this site assume a healthy jar. USDA’s mold guidance is the right instinct for a wet food: discard it rather than trimming a spot.
Empty the jar into the trash, not back into a flour bin. Wash the jar, lid, spatula and any cloth that touched the culture in hot soapy water. If a wooden spoon or a cloth lid is stained and smells, retire it from starter duty. Let everything dry. Starting again in the same unwashed crock is how the next jar molds on day two.
Restart from a clean culture or from scratch
If you have a second jar that never grew mold, and it still smells tangy rather than rotten, you can feed that one in a clean container. If the moldy jar was your only culture, begin again with the from-scratch guide: flour, water, a clean jar and a feeding rhythm. Early days of a new starter can smell odd and then go quiet. That pattern is not mold. Fuzzy spots during a new starter are still a reason to discard and begin again with cleaner tools.
Do not accept a scoop from a friend’s jar that also has a suspicious surface. Generosity does not sterilize a culture. A dried, well-kept backup from a healthy starter is a different matter if you stored it cleanly. When you revive any backup, give it the same visual check before you scale up a feed.
Why jars mold in home kitchens
Mold needs time, moisture and a surface. A starter left for many days, especially with dried paste on the walls, is an easy place for spores that are already in a kitchen to land. A dirty spoon, a lid closed on wet flour dust, fruit flies, or a jar stored near a compost bowl all raise the odds. Refrigeration slows a healthy culture. It does not make a dirty jar safe, and cold starters still mold if they are neglected long enough.
You cannot seal a kitchen against every spore. You can feed on a rhythm, scrape down the sides, use a clean utensil, and keep the jar where you will see it. A smaller culture needs smaller feeds and is easier to refresh before the walls turn into a pantry. The feeding guide helps you keep only what you will bake with, plus a reserve.
Separate this from ordinary starter troubles
A starter that will not rise, smells like alcohol, or has gray liquid can often be fed back to strength. Those are the not-rising and hooch guides. A starter that rose and then fell is ripe or past peak, not moldy. Bubbles are not fuzz. Learn the difference once, with the jar in your hand, so you do not throw away a hungry culture or keep a moldy one.
After you restart, do not change flour, ratio and temperature all at once and then blame the new starter for being slow. Pick one feeding pattern, mark the jar, and give it several days. Bake when it rises reliably. If mold returns immediately in a clean routine, look again at the container and the tools, not at a secret extra ingredient.
| What you see | Likely reading | What to do |
|---|---|---|
| Gray or brown liquid | Hooch, a hungry starter | Pour or stir, then feed a healthy jar |
| Sharp acetone smell, no fuzz | Hunger and acidity | Refresh by weight and watch for a rise |
| Fuzzy or hairy spots | Mold | Throw out the culture and wash the jar |
| Pink or orange streaks | Contamination | Throw out the culture and wash the jar |
| Wrinkled film you cannot identify | Do not guess | Discard if you are unsure |
FAQ
Can I scrape mold off sourdough starter and keep feeding?
No. A starter is wet, so surface mold is a reason to throw out the whole culture and wash the jar. Scraping the top does not make the rest safe to bake with.
Is pink or orange liquid on starter hooch?
No. Ordinary hooch is gray or brownish. Pink or orange color means you should discard the starter. Do not feed it or cook with it.
Can I bake bread with a moldy starter if the oven is hot?
Do not bake or cook with a moldy starter, including discard recipes. Discard the culture. Use a healthy jar for pancakes, crackers and bread.
What is the difference between hooch and mold?
Hooch is liquid from a hungry starter and can smell like alcohol. Mold is fuzzy or hairy growth, sometimes with green, black or other colors. When you are unsure, discard the jar.
How do I start again after mold?
Wash the jar and utensils, then begin from a healthy backup or from flour and water in a clean container. Keep the sides scraped down and feed on a schedule you can see.
Sources & further reading
This guide combines published references with our own explanations and decision aids. Numerical examples are illustrative; they are not records of Sourdough Bench test bakes.
Put it into practice.
Keep the recipe, observations and next change together in your downloadable bake log. For a symptom-led starting point, use the loaf troubleshooting guide.
