What does a pizza stone actually do?
A pizza stone is a slab, usually ceramic or cordierite, that you heat in the oven so a pizza bakes from the bottom as well as from the air. The stone’s job is heat capacity. It holds energy while the oven recovers from the door opening, then gives that energy to the dough. Baking steel is a flat plate of steel that does the same job with higher conductivity. Heat moves out of steel and into wet dough faster than it moves out of ceramic. That is why a steel can spot and set a crust in a home oven whose maximum is only 500–550°F / 260–290°C, while a stone often needs more minutes for the same color.
Neither tool is a pizza oven. A wood-fired oven floor can sit near 700–900°F / 370–480°C and bake a pie in about 90 seconds. A home oven cannot. The bake surface choice on this page is which plate to preheat inside the oven you have: stone, steel, or a heavy sheet if you have neither. The dough formula still lives on the homemade sourdough pizza recipe. A stone does not fix a dough that was mixed for a different bake.
| Feature | Pizza stone | Baking steel |
|---|---|---|
| Material | Ceramic or cordierite | Steel plate, often 1/4 in / 6 mm or thicker |
| How it heats dough | Stores heat, releases it slowly | Conducts heat into the crust faster |
| Preheat in a home oven | About 60 min at 500°F / 260°C | About 60 min at 500°F / 260°C; heat then moves into the dough faster |
| Bottom of the pizza | Gradual browning, harder to scorch | Darker and sooner; can scorch if the bake runs long |
| Shock and water | Can crack if you set a cold wet pan on it | Will not crack from a splash; it can rust if stored wet |
| Best fit | A slower bake, or a baker who tends to leave pies in | A home oven that needs more bottom heat in less time |
Should I buy a stone or a steel for a home oven?
Buy steel if you bake pizza in a home oven and you want the underside brown before the rim dries. Steel gets hot and then hands that heat to wet dough faster than ceramic does. A 1/4 inch / 6 mm plate is a common starting thickness. Thicker steel, around 3/8 inch / 10 mm, holds more heat for a second pie and is heavier to lift. Many bakers run the oven at its maximum, often 500 or 550°F / 260 or 290°C. Put the steel on a rack in the lower third if you will broil the top at the end, or in the upper third if the top element is weak.
Buy a stone if you already own one, or if you want a slower bottom that is less likely to go black while you are still learning to launch a pie. Cordierite handles heat better than a thin decorative tile. Give stone or steel about 60 minutes at 500°F / 260°C. King Arthur’s crisp-crust notes use that hour for both. A stone that has only been in the oven for 15 minutes is still a cold board with a hot face. The first pizza will be pale underneath.
A heavy preheated sheet is the honest fallback. It crisps better than a cold pan and worse than steel. Use it while you decide, and say so in the bake log. An outdoor pizza oven is a different tool, with its own floor temperature. Do not copy a 90-second wood-oven bake onto a 500°F home stone.
How long should the stone or steel preheat?
Preheat the oven and the surface together for about 60 minutes at 500°F / 260°C. Oven thermostats often call “ready” when the air is hot and the slab is not. Steel will transfer heat faster once it is actually hot. It still wants that preheat, especially if the plate is thick. If you are baking two pizzas, leave the surface in the closed oven for 4 or 5 minutes between them so it recovers. A second pie on a robbed stone comes out pale.
Load the pizza and bake. On steel at 500°F, a stretched homemade pie often needs about 7 to 9 minutes. On a stone, plan closer to 8 to 11 minutes. On a sheet, 10 to 12 minutes is common, and the bottom will be lighter. These are home-oven windows for the dough on the sourdough pizza recipe, not times for a 900°F oven. Rotate once if the back of your oven runs hotter. Broil for the last 30 to 60 seconds only if the rim is still pale and the bottom is already set. Broiling from the start burns the top and leaves the crumb raw.
Thermal shock cracks stones. Do not set a frozen pie, a cold pan of water, or a dripping towel on a hot stone. Let the stone cool inside the oven. Steel can go from hot to a cool rack more safely, but a 500°F plate will burn a counter and a hand. Wash steel when it is cool, dry it, and do not store it wet.
Does the dough change with the surface?
Yes. A steel or a very hot stone wants a dough you can stretch thin and launch, often around 65–72% true hydration for a home oven, so it does not puddle or glue itself to the peel. A sheet-pan pizza can be a little wetter and thicker because the pan holds it. The pizza dough guide is the decision page for that match. This page only chooses the surface. Oil on a stone is a mistake: it smokes and it stains. Oil belongs in a pan pizza, or as a teaspoon on the rim after the bake, not soaked into cordierite.
Reheating is a smaller version of the same choice. A hot stone or steel at 450°F / 230°C revives a slice in 4 to 6 minutes. A cold stone does not. If you are only reheating one slice, a skillet is simpler than firing the oven for an hour.
FAQ
What is a pizza stone?
A thick ceramic or cordierite slab you preheat so pizza dough bakes on a hot surface instead of a cold pan. It stores heat and releases it more slowly than metal.
Is a pizza steel better than a stone?
In a home oven, steel usually browns the bottom faster because metal conducts heat better. A stone is slower and less likely to scorch. Pick steel for speed at 500–550°F, and a stone if you want a gentler bottom.
How long do I preheat a pizza stone?
About 60 minutes at 500°F / 260°C, for a stone or a steel. Steel moves heat into the dough faster after that preheat. The oven’s “ready” beep is about the air, not the slab.
Can I use a baking sheet instead?
Yes. Preheat a heavy sheet and expect a paler bottom and a slightly longer bake, about 10 to 12 minutes for the homemade sourdough pizza on this site. It is a real method, not a failed stone.
Will a stone crack?
It can, if cold water or a frozen pan hits it while it is hot. Cool it in the oven. Steel does not crack from thermal shock, but it rusts if you put it away wet.
Sources & further reading
This guide combines published references with our own explanations and decision aids. Numerical examples are illustrative; they are not records of Sourdough Bench test bakes.
Put it into practice.
Keep the recipe, observations and next change together in your downloadable bake log. For a symptom-led starting point, use the loaf troubleshooting guide.
